Faggoting press of 16000 kN force mode BA1642

Properties

Data

• Maximum pressing force 16 000 kN
• Hydraulic fluid pressure  32 MPa
• Specific pressure of final pressing  25 MPa
• Pressing cycle duration, not more than 180 s
• Maximum thickness of pressed scrap piece 12 mm
• Package parameters:

         section 1000x710 mm

– density, not less than 2000 kg/m3

 – weight 2300-3500 kg.

• Pressing chamber dimensions:

- length 3500mm

– width 2800mm

– depth 2470mm

– volume 24,2 m3

• Press dimensions:

-length 19450 mm

-width 15 810 mm

• Height above floor level at raised  basket position 6760 mm
• Hydraulic power unit dimensions – length 12000 mm

Width 8000mm

Height 4000mm

Advantages

• Pressing force is significantly higher in comparison to available analogous
• Wide list of positive references (over 100 products)
• Low wear rate
• Long nonfailure operation time
• High maintainability
• Capacity of the highest standards of the field

Capabilities

• Standard size scrap processing
• Lower expenses on manual scrap preparation
• Operation at low temperatures up to

-40⁰ 

Special features of the press BA1642

• Three-step pile formation
• Large pressing chamber
• Replaceable lining plates of the pressing chamber
• Bed is an opened top bucket connected to the longitudinal and cross-wise pressing mechanisms and to the bolt assembly
• Charging platform and control panel are located on top of the bed
• Major press mechanisms operate at rapid motion when pressing at low resistance
• Noncontactact measurement system