A modern press for refractory product manufacturing.
Special parameters of the machine provide world standard quality of the manufactured product.
State of the art technical solutions and focused work on the project ensure easy operation and available maintenance of the machine.
Parameters:
Technical data of DG0542N
Nominal force of the press, kN 1600
Major slide travel, mm 630+20
Maximum ejection force, kN 1600
Mould box dimensions, mm x mm 1200×1200
Maximum surface of press mould window mm x mm 900×500
Maximum height of press mould filling, mm 500
Number of simultaneously pressed parts, pcs 1…4
Maximum capacity, pressings per minute 5*
Speed of reverse run of the major slide, mm/sec 100…400
Speed of the low speed run of the major slide, mm/sec 5..20
Pressing speed, mm/sec 2,5…36
Deviation of the pressed product height of the nominal, mm + 0,3
Measurement accuracy of positioning of the major slide + 0,01
Distance between the upper surface of the lower die bed plate and the lower surface of the upper die bed in raised position of the major slide (open press height), mm, not less than 2090
Distance between the upper surface of the lower die bed and the support surface of the moulding box holder to the matrix slide at the maximum raised matrix slide position, mm, not less than 710
Nominal force of charging carriage, kN 31
Charging carriage traverse, mm 1500-20
Distance between centers of the columns, mm x mm 1750+0,1×1100+0,1
Nominal working pressure in hydraulic system, mPa 32
Working pressure of auxiliary drive, mPa 0,1…7,0
Dimensions of the pressing unit, mm, not less than: