The machine is designed based on the latest developments in the field of hydropress construction and modern technologies and in consideration of over 30 years operation experience of presses D0542N and DB0542N
The press combines parts, components and design solutions which have proved their best performance in operation of previous models. This guarantees press reliability and quality of the products.
Hydraulic drive is based on components of the leading manufacturer of the hydraulic equipment market
Low pressure system for auxilary mechanisms control includes two pumps with adjustable electic drives
Hight pressure system with three adjustable drives
Hydraulic system is closed and isolated for protection from contamination by industrial polution
The entire hydraulic drive is mounted in a modular assambly, including a feed tank, pumps and hydraulic equipment
Electic equipment ensures secure and failure free press operation
Location and speed of the movement mechanism of the press is defined by noncontactact travel gauges
IP54 protection level of station cabinets and panel case
Design of the pendant rotating device of the control panel allows the operator to choose the most convenient optimal position depending on location of products.
Programmable logic controller is the core of the press control system. High power central processing unit allows reproduction of the required technological parameters with high accuracy and stability. The controller has a distributide peripheral. Input-output devices are connected to the central contoller processor via Enternet. The contol panel is connected to this chain as well. The panel serves for displaing and entering of numerical, text, graphic information and implementation of control functions of the press. The panel is integrated in the contorl panel and supplied with a 15 inches colored liquid crystal display with active matrix.
Our equipment ensures optimal solution of your production goals.
Technical parameters
DG0542N
Nominal force of the press, kN
16000
Major slide travel, mm
630+20
Maximum ejection force, kN
1600
Mould box dimensions, mm x mm
1200×1200
Maximum surface of press mould window, mm x mm
900×500
Maximum height of press mould filling, mm
500
Number of simultaneously pressed parts, pcs
1…4
Maximum capacity, pressings per minute
5*
Speed of reverse run of the major slide, mm/sec
100…400
Speed of the low speed run of the major slide, mm/sec
5..20
Pressing speed, mm/sec
2,5…36
Deviation of the pressed product height of the nominal, mm
+/- 0,3
Measurement accuracy of positioning of the major slide
+/- 0,01
Distance between the upper surface of the lower die bed plate and the lower surface of the upper die bed in raised position of the major slide (open press height), mm, not less than
2090
Distance between the upper surface of the lower die bed and the support surface of the moulding box holder to the matrix slide at the maximum raised matrix slide position, mm, not less than
710
Nominal force of charging carriage, kN
31
Charging carriage traverse, mm
1500-20
Distance between centers of the columns, mm x mm
1750+0,1×1100+0,1
Nominal working pressure in hydraulic system, mPa
32
Working pressure of auxiliary drive, mPa
0,1…7,0
Dimensions of the pressing unit, mm, not less than: length / width / height / height over floor level
